Displaying Tool Details - Siemens SINUMERIK 828D Operating Manual
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
11.11
Displaying tool details
All of the parameters of the selected tool are listed in the "Tool details - all parameters"
window.
The parameters are displayed, sorted according to the following criteria
● Tool data
● Cutting edge data
● Monitoring data
Protection level
You require access level, keyswitch 3 (protection level 4) in order to edit the parameters in
the detail window.
Procedure
...
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
The tool list, the wear list, the OEM tool list or the magazine is
opened.
2.
Position the cursor to the desired tool.
3.
If you are in the tool list or in the magazine, press the ">>" softkey and
"Details".
- OR -
If you are in the wear list or OEM tool list, press the "Details" softkey.
The "Tool details - all parameters" window is displayed.
All of the available tool, cutting edge and monitoring data of the
selected tool are displayed in the list.
You can view all of the window contents using the horizontal scroll
bar.
4.
Press the "Tool data" softkey to return to the "Tool data" column.
Tool management
11.11 Displaying tool details
383
Advertisement
Table of Contents
