Display Program Level - Siemens SINUMERIK 828D Operating Manual

Machining the workpiece
4.4 Displaying the current program block
Procedure
4.4.3

Display program level

You can display the current program level during the execution of a large program with
several subprograms.
Several program run throughs
If you have programmed several program run throughs, i.e. subprograms are run through
several times one after the other by specifying the additional parameter P, then during
processing, the program runs still to be executed are displayed in the "Program Levels"
window.
Program example
N10 subprogram P25
If, in at least one program level, a program is run through several times, a horizontal scroll
bar is displayed that allows the run through counter P to be viewed in the righthand window
section. The scroll bar disappears if multiple run-through is no longer applicable.
Display of program level
The following information will be displayed:
● Level number
● Program name
● Block number, or line number
● Remain program run throughs (only for several program run throughs)
126
1. A program is selected for execution and has been opened in the
"Machine" operating area.
2. Press the "Basic blocks" softkey.
The "Basic Blocks" window opens.
3. Press the <SINGLE BLOCK> key if you wish to execute the program
block-by-block.
4. Press the <CYCLE START> key to start the program execution.
The axis positions to be approached, modal G functions, etc., are
displayed in the "Basic Blocks" window for the currently active program
block.
5. Press the "Basic blocks" softkey once again to hide the window again.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling