Programming technological functions (cycles)
8.4 Further cycles and functions
Tool
To avoid collisions, you can use the 5-axis transformation (software option) to define the
position of the tool tip during swiveling.
● Correct
● No correction
Procedure
Parameters, G code program
PL
Machining plane
Parameter
Description
TC
Name of the swivel data set
No: No retraction before swiveling
Retract
•
Z: Retraction in the direction of machine axis Z
•
Tool direction, max.: Retract, maximum in the tool direction
•
Tool direction inc.: Retract incremental in the tool direction
•
ZR
Retraction path - (only for incremental retraction in the tool direction)
New: New swivel plane
Swivel plane
•
Additive: Additive swivel plane
•
308
The position of the tool tip is corrected during swiveling (tracking function).
The position of the tool tip is not corrected during swiveling.
Machine manufacturer
Please also refer to the machine manufacturer's instructions.
1.
The part program or ShopMill program to be processed has been
created and you are in the editor.
2.
Press the "Various" softkey.
3.
Press the "Swivel plane" softkey.
The "Swivel plane" input window opens.
4.
Press the "Basic setting" softkey if you wish to reestablish the initial
state, i.e. you wish to set the values back to 0.
You use this,for example, to swivel the coordinate system back into its
original orientation.
Parameters, ShopMill program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant
cutting rate
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
mm/min
mm/rev
rpm
m/min
Unit
HMI sl Milling