Input Automix Block - Extron electronics XMP 240 C AT User Manual

Input Automix Block

Double-click the
automix processor into the block.
Figure 60.
Once the automix processor is inserted into the
open the
Automix
Figure 61.
Automix Channel Name — This name changes to match the default or user-defined
1
input name.
AM Group Assignment Panel — Provides nine radio buttons to assign the current
2
automix processor to an AM (automix) group. The default is
automixer unassigned.
Show AM Group Details Button — Opens the
3
Automix Help
Automix Parameters — Provides configuration controls for all automix parameters.
4
dBFS Meter — Displays the post-automix signal level.
5
Gate Status Indicator — This LED lights when monitoring is enabled and the gate is
6
open.
Monitor Gate Checkbox — Click the
7
responses regarding gate status (see
Set Defaults Button — Resets all automix parameters to their default settings.
8
Bypass Button — Bypasses the automix processor. When the button is red, bypass is
9
enabled.
OK Button — Confirms changes made to the contained parameters and closes the
¢
Automix
block to open a drop-down menu. Select
Automix
Automix Block and Drop-Down
dialog box.
Automix Dialog Box
button for more information regarding
dialog box.
Auto-mixer
Automix block, double-click the block to
Automix Channel Name
1
AM Group Assignment Panel
2
Show AM Group Details Button
3
Automix Parameters
4
dBFS Meter
5
Gate Status Indicator
6
Monitor Gate Checkbox
7
Set Defaults Button
8
Bypass Button
9
OK Button
¢
Cancel Button
£
Automix Help Button
¤
None
Automix Groups
Automix Groups
checkbox to enable SIS
Monitor Gate
Automixer Gate Monitoring
XMP 240 C AT • DSP Configurator Software
to insert the
and leaves the
dialog box (click the
).
on the next page).
39