Example 2 - Decoding A File To Targa Files And Placing Them In A Specified Output Directory; Example 3 - Outputting Jpg Files With Graphical Output; Example 4 - Generating Audio Files, Specifying The Output Directory; Advanced Use - Extron electronics VN-Matrix User Manual

Example 2 — decoding a file to Targa files and placing them in a specified
output directory
The command is:
./gcode ‑t ‑o /home/matrix_rec/Targa ‑i /home/matrix_rec/Storage/SAC_
Test/ Dave_Gilmour_Dimming_of_the_Day_620027.0.0_r0_s0.rec
•
•
•
Example 3 — outputting JPG files with graphical output
The command is:
./gcode ‑g ‑j 80 ‑i /home/matrix_rec/Storage/SAC_Test/
Dave_Gilmour_Dimming_of_the_Day_620027.0.0_r0_s0.rec
•
•
•
•
Example 4 — generating audio files, specifying the output directory.
To convert an Audio file to a .wav file and place in a folder "Targa." The default name for the
audio file is
./gcode
Dave_Gilmour_Dimming_of_the_Day_620027.A0.0_r1_s0.rec
•

Advanced Use

Example 1 — stopping the export process
To stop the export process, press <Ctrl> + <C> at any time. Any image files that were
generated prior to the process being stopped remain in the specified output folder.
Example 2 — determining the start and end points of the recording
The command is:
./gcode ‑l ‑i /home/matrix_rec/Storage/SAC_Test/
Dave_Gilmour_Dimming_of_the_Day_620027.0.0_r0_s0.rec
•
•
Since there is no flag, the frames are not displayed as they are generated.
‑g
The output is targa (tga) files (
The ouput directory path is
Each frame is displayed as it is generated (
The output is jpg files ( ).
‑j
Since no flag is set, the output files are stored at the default location (
‑o
matrix_rec/VNRecorder_verx.y.z
The quality setting is 80%.
.
music.wav
‑o /home/matrix_rec/Targa ‑i /home/matrix_rec/Storage/SAC_Test/
The gcode utility recognizes that the file is an audio file (
.WAV file with the name
music.wav
The flag causes the utility to return the start and end time stamp of the recording:
‑l
17:45:27.53 ‑ 17:47:27.65
The length of the recording is calculated by subtracting the start time from the finish
time (in this case 2 minutes 0.12 seconds).
VNM Recorder • gcode Frame Translator Utility Instructions
).
‑t
/home/matrix_rec/Targa
).
‑g
).
.
.
.
/home/
) and automatically creates a
.AO
83