Siemens SIMOVERT MASTERDRIVES Manual page 1351

Parameter Description
U825* Index 1:
Offset Corr Par Acceleration of displacement angle correction
[1000*LU/s^2]
2825
Index 2:
Speed of displacement angle correction
[1000*LU/min]
Index 3:
Rated speed referred to by the output speed in percent
(KK832)
[1000*LU/min]
Index 4:
Here the adjusting speed [1000 LU/min] is specified for
manual adjustment via the binectors U822.3 (+) and
U822.4(-).
Index 5:
Acceleration of the adjustments for ramp-up [1000*LU/s^2]
Index 6:
Acceleration of the adjustments for ramp-down
[1000*LU/s^2]
In function diagram 794
n826 Visualization parameter additive offset angle
VisPar Displ Act [in function diagram 794]
2826 Index 1: Remaining offset to add
Index 2: Current offset
Index 3: Output total offset (KK835)
U827* With rising edge at the input, the current displacement is
Set_DispAngle set to the setting value of the connector U678.2 (setting
input).
2827
U828* Input of the modulo displacement adder
S.DisplAdd [Function diagram 794a]
2828
n829 Visualization parameter (KK 836)
VisPar DisAddMod Output of displacement adder with limitation to ACL [LU]
32 bit
2829
[Function diagram 794a]
U830* Axis cycle length for displacement adder
AZL DisplaceAdd [Function diagram 794a]
2830
U831* Input of modulo displacement adder 2
S.DisplAdd_2 [Function diagram 794a]
2831
Siemens AG 6SE7087-6QX70 (Edition AG)
SIMOVERT MASTERDRIVES Compendium Motion Control
(KK833)
(KK834)
Data Read/write
index1: 0,00 Menus:
Min: 0,00 - Parameter menu
Max: + Free blocks
20000000,00 - Upread/free access
Unit: - Changeable in:
Indices: 6 - Ready to switch on
Type: O4
Dec.Plc.: 0 Menus:
Unit: - - Parameter menu
Indices: 3 + Free blocks
Type: I4 + Technology
+ Synchronism
- Upread/free access
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - - Upread/free access
Type: L2 ,B Changeable in:
- Ready to switch on
- Operation enabled
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 4 + Free blocks
Type: L2 ,K - Upread/free access
,K Changeable in:
- Ready to switch on
- Operation enabled
Dec.Plc.: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: I4 - Upread/free access
Init: 4096 Menus:
Min: 0 - Parameter menu
Max: + Free blocks
2147483647 - Upread/free access
Unit: - Changeable in:
Indices: - - Ready to switch on
Type: O4 - Operation enabled
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 4 + Free blocks
Type: L2 ,K - Upread/free access
,K Changeable in:
- Ready to switch on
- Operation enabled
234