Crt - Epson S1D13504 Technical Manual

Epson Research and Development
Vancouver Design Center
13504CFG.EXE Configuration Program
Issue Date: 01/01/30

CRT

CRT Setup
When CRT is selected from the Device menu, the CRT Setup window is displayed. To select a CRT
assignment, highlight it (in the example window below, "CRT 640x400 @ 85Hz,
CLKI=33.333MHz" is highlighted) and click OK. If the highlighted CRT assignment needs
changes, click Edit and see the next section "Edit CRT Setup."
Whenever a CRT assignment is edited or selected in the CRT Setup dialog box, the setup is copied
to Current Configuration. The editing is automatically performed on the current configuration.
In addition to OK, Cancel, and Edit commands, a Help command is listed in the CRT setup windows.
In this version of 13504CFG, the Help files are unavailable.
Figure 11: 13504CFG CRT Setup
Page 19
S1D13504
X19A-B-001-04