Epson S1D13504 Technical Manual page 350

Page 8
All ISA Bus Evaluation Cards
X00A-E-003-04
1. Install the evaluation board in the computer and boot the computer.
2. Go to the CONTROL PANEL and select ADD NEW HARDWARE.
3. Click NEXT.
4. Select NO and click NEXT.
5. Select OTHER DEVICES from the HARDWARE TYPES list.
6. Click HAVE DISK.
7. Specify the location of the driver files and click OK.
8. Select the file S1D13XXX.INF and click OK.
9. Click OK.
10. The EPSON PCI Bridge Card should be selected in the list window.
11. Click NEXT.
12. Click NEXT.
13. Click Finish.
Epson Research and Development
S1D13XXX 32-Bit Windows Device Driver Installation Guide
Vancouver Design Center
Issue Date: 01/04/17