Clocks Tab - Epson S1D13504 Technical Manual

Color graphics lcd/crt controller

Hide thumbs Also See for S1D13504:

Table of Contents

Epson Research and Development

Vancouver Design Center

Clocks Tab

13504DCFG Driver Configuration Program

Issue Date: 01/10/26

The Clocks tab is intended to simplify the selection of input clock frequencies and the

source of internal clocking signals. For further information regarding clocking and clock

sources, refer to the S1D13504 Hardware Functional Specification, document number

X19A-B-001-xx.

Changing clock values may modify or invalidate Panel or CRT settings. Confirm all set-

tings on these two tabs after changing any clock settings.

These controls are used to inform 13A04DFGC of the

clock frequency attached to CLKI. Setting incorrect

values will result in errors in the rest of the configu-

ration process.

Use this control to set the CLKI frequency by selecting

a frequency from the dropdown control. If the

dropdown does not contain the exact frequency then the

frequency can be typed into the edit box.

X19A-B-008-03

Table of Contents