Epson Research and Development
Vancouver Design Center
Comments
Sample Program Messages
13504CFG.EXE Configuration Program
Issue Date: 01/01/30
It is assumed that the 13504CFG user is familiar with S1D13504 hardware and software. Refer to
the S1D13504 "Functional Hardware Specification," document number X19A-A-002-xx, and the
S1D13504 "Programming Notes and Examples" manual, document number X19A-G-002-xx for
information.
In addition, the 13504CFG user must know the hardware setup for the panel and CRT, and the setup
for the given hardware platform (such as memory addresses and memory speed).
ERROR: Could not open <filename>.
Could not open the 13504 utility called <filename>. This message is generated from the command
line: 13504CFG filename script.ini.
ILLEGAL VALUE: Choose between 8 and 800, in multiples of 8 pixels.
The user entered an invalid number when changing the Panel X Resolution.
ERROR: Failed to open the file!
The selected program does not have the HAL structure, therefore cannot be opened by 13504CFG.
Page 29
S1D13504
X19A-B-001-04