Crt Tab - Epson S1D13504 Technical Manual

Epson Research and Development
Vancouver Design Center

CRT Tab

CRT Display
Dimensions
13504DCFG Driver Configuration Program
Issue Date: 01/10/26
The CRT tab configures settings specific to the CRT display device.
CRT Display Dimensions
Simultaneous Display Options
Note
For CRT operations, 13504DCFG supports VESA timings only. Overriding these regis-
ter values on the Registers page may cause the CRT to display incorrectly.
Select the CRT resolution and frame rate from the drop-
down list. The available options vary based on selec-
tions made in the Clocks tab.
If no selections are available, the CRT pixel clock
settings on the Clocks tab must be changed.
When both the LCD and CRT are operating in simulta-
neous display mode, a method of displaying both
images must be selected based on the vertical resolution
(height) of the images. If both displays are the same
resolution, select "Normal". Otherwise, refer to the
S1D13504 Hardware Functional Specification,
document number X19A-B-001-xx for information on
selecting the best option.
Page 19
Simultaneous
Display Options
S1D13504
X19A-B-008-03