Ricoh V-C3 D081 Field Service Manual page 1001

Adjusts the height of the paddle roller at initialization. If the correct number is not entered,
the stack will not be jogged correctly before binding.
[-3 to +3/0/0.1 mm]
This SP must be adjusted after replacement of one or more of the following items:
• Ring binder main board
• Binder unit control board
• Pre-bind jogger unit
The correct value to be entered for the adjustment is written in the first line of the label. This
label is attached to the front cover of the pre-bind jogger unit.
Note: The value must be divided by "10". For example, "8" is actually "0.8 mm)
6506 Adj Jog: Binding 1 Ring Binder D392
Group 6000
4
423