Saving Energy - Ricoh M C251FW User Manual

12. Appendix

Saving Energy

This machine is equipped with the following Energy Saver modes: Energy Saver mode 1 and Energy
Saver mode 2. If the machine has been idle for a certain period of time, the machine automatically
enters Energy Saver mode.
The machine recovers from Energy Saver mode when it receives a print job, prints a received fax, or
when any key is pressed.
Energy Saver mode 1
The machine enters Energy Saver mode 1 if the machine has been idle for about 30 seconds. It
takes less time to recover from Energy Saver mode 1 than from power-off state or Energy Saver
mode 2, but power consumption is higher in Energy Saver mode 1 than in Energy Saver mode 2.
Energy Saver mode 2
The machine enters Energy Saver mode 2 after the period of time specified for this setting is
passed. Power consumption is lower in Energy Saver mode 2 than in Energy Saver mode 1, but it
takes longer to recover from Energy Saver mode 2 than from Energy Saver mode 1.
After printing in Energy Saver mode 2, the power is turned off without waiting for 1 minute.
Specifications
Energy Saver mode 1
Energy Saver mode 2
Duplex Function
*1 Recovery time and power consumption may differ depending on the conditions and environment of the
machine.
*2 Achieves ENERGY STAR energy savings; product fully qualifies when packaged with (or used with) a
duplex tray and the duplex function is enabled as an option.
For details about Energy Saver modes, see page 251 "Administrator Tools Settings".
434
Power Consumption
Default Time
Recovery Time
Power Consumption
Default Time
Recovery Time
*2
*1
26.5 W
26.9 W
30 seconds
*1
10 seconds or less
*1
1 minute
*1
12 seconds
Standard
0.74 W
0.70 W