Internal Calibrated Leak - Agilent Technologies VS Series Operation Manual

To configure the Date & Time screen:
1. Press a button to activate its field.
2. Use the and arrows or keypad to set the value.
3. Press Done for each item configured.
4. Repeat step 1 through 3 for each desired item.
5. Press OK to exit the screen.

2.3.14.2 Internal Calibrated Leak

If the internal calibrated leak option is activated, the Internal Calibrated Leak button
appears.
1. Press Internal Calibrated Leak. The Internal Calibrated Leak screen appears (Figure 2-
25).
The screen allows you to enter information about the optional internal calibrated leak.
To use this screen:
1. Press a Value button to activate its field. A keypad screen appears.
2. Enter the required values as shown on the calibrated leak label.
3. Repeat step 1 and 2 for each desired item.
2-52
VS Series Component Leak Detector
Figure 2-25 Internal Calibrated Leak