Graphical Display - Agilent Technologies VS Series Operation Manual

2.2.4.3 Graphical Display Screen
The graphical display screen (Figure 2-5) represents the leak rate over time. The graphing
line appears in blue and changes to red when a reject set point is triggered.
Timer
Clear
2-20
VS Series Component Leak Detector
Figure 2-5 Graphical Display
The Timer soft key button toggles the graphing time between 120
and 720 seconds.
The timer automatically defaults to 120 seconds on the leak
detector power -up.
Press the Timer button while graphing to toggle the timing scale
and clear the current graph.
The data rate for the timers are:
120 seconds - two measurements per second
720 seconds - one measurement per three seconds.
The Clear soft key button clears the plotted graph. The graph
automatically clears when the leak detector start of a new test.