2.2 VS C-15 Display
The optional VS C-15 Display unit with Touch Panel is used for the initial set-up and
configuration of the VS C-15 leak detector. Once the leak detector is set up and configured
for a specific application, basic operation is controlled by primarily utilizing one of several
communications control interfaces: PC, PLC or Industrial ProfiNet network.
2.2.1 Screens Flow
The operator interfaces the VS C-15 leak detector functions through a series of screens and
soft key buttons, which are navigated as shown in Figure 2-1.
2-6
VS Series Component Leak Detector
*
Figure 2-1 Screen Flow
*Available
SPLIT
February
FLOW*
2011