System Information - Agilent Technologies VS Series Operation Manual

2.2.5.5 System Information

Press System Information on the Menus screen.
The System Information screen appears (Figure 2-11 on page 2-32).
The system information screen shows the current status of various settings within the
system as well as the software version information. Table 2-7 on page 2-32
describes the displayed system information in detail.
Display
Active Filament
Active Reject Set points
Audio Set Point Status
2-32
VS Series Component Leak Detector
Figure 2-11 System Information
Table 2-7 System Information Display Detail
Description
Shows which filament (1 or 2) is
Active
Shows the enabled reject set points
and those that are turned on in the
system
Shows the status of the audio set
point if ACTIVE.
Action
To change the filaments, go the
MENUS SET_UP MANUAL
TUNING screens
To change which set points are
active, go to the MENUS REJECT
AND AUDIO SET screens
To change the status of the audio
set point, go to the MENUS
REJECT AND AUDIO SET
screens