Current Date & Time Set-Up - Agilent Technologies VS Series Operation Manual

Password Activates/deactivates the password function: ON/OFF. When ON, pressing
Maintenance from the Menus screen opens the password prompt screen.
When OFF, no password is required to access the SET-UP screens.
The default condition for this parameter is OFF.
Change Password Changes the password used to access the Set-Up and Maintenance screens. Enter
up to 8 numeric values for the password and confirm the password selection. An
empty entry is not allowed. If no password is entered, the old password is used.
The default password from the factory is 777777. You will need this when
changing to a new password
2.3.14.1 Date & Time Set-Up
This function allows you to input the current date and time so that the system can use that
information
1. Press the button next to Date & Time.
The Current Date & Time Set-Up screen appears (Figure 2-24).
VS Series Component Leak Detector
The password can also be read through the RS-232 port
in the event of a lost password. See Table 4-1 on page 4-
1 and Table 4-6 on page 4-15.
Figure 2-24 Current Date & Time Set-Up
2-51