Agilent Services - Agilent Technologies VS Series Operation Manual

Agilent Services

Agilent offers:
Rebuilt spectrometers on an exchange basis.
NIST-traceable calibrated leak testing and verification services.
Preventive maintenance services.
Overhaul services.
System recertification.
Support agreements.
On-site support.
Please see our catalog or contact us to learn about available services.
VS Series Component Leak Detectors
To avoid injury, wait until the turbo pump is completely
WARNING
stopped before disconnecting it from the vacuum system.
To vent the turbo, open the knurled vent screw located on the
side of the turbo. If the turbo is spinning, you will hear it wind
down. Close the vent screw after the turbo has stopped.
If the internal calibrated leak option is installed, break the
vacuum by disconnecting the calibrated leak valve block from
the NW16 vent port.
xxiv