Nw25 Clamp To Spectrometer; Pump Feet Nuts - Agilent Technologies VS Series Operation Manual

VS Series Component Leak Detector
5. Remove the NW25 clamp using the wing nut and place the O-ring to the side
(Figure B-4).
Figure B-4 NW25 Clamp To Spectrometer
6. Unscrew the connector to the pump ad pull the cable away (Figure B-5).
Figure B-5 NW25 Clamp To Spectrometer
7. Use a 10 mm nut driver to remove the two nuts holding the feet (Figure B-6).
Figure B-6 Pump Feet Nuts
B-5