General Description - Agilent Technologies VS Series Operation Manual

Screen
HOME Accesses the Control Panel and Menu screens.
Activates the Zero function. The LED illuminates while zeroing occurs.
Control Panel Activates/deactivates:
Displays the type of leak: Internal or external, associated with Calibrate.
Enables the leak rate vs. time graphic display
Adjusts the speaker volume.
Menus Accesses the following screens for tailoring leak detector operation:
VS Series Component Leak Detector
Table 2-2 General Description
Std Leak
Offset
Tune
Calibrate
Zero Enable
Calibration Set-Up – Configures leak type, mode and parameters
(Section 2.2.5.1 "Calibration Set-Up Screen" on page 2-23).
Reject & Audio Set Points – Configures parameters and toggles operations on/
off for each reject set point for both pressure and leak rate and for the audio
threshold
(Section 2.2.5.2 "Reject and Audio Set Points Screen" on page 2-25).
Transfer Points with Stabilization Wait Timer - Configures the transfer points
wait timer (Section 2.2.5.3 "Transfer Points with Stabilization Wait Timer" on
page 2-28).
Leak Ranging – Configures the Range Stop, Manual Range values, and range
of operation
(Section 2.2.5.4 "Leak Rate Ranging Screen" on page 2-29).
System Information – Displays the status of configured and active items
(Section 2.2.5.5 "System Information" on page 2-32).
Control Panel Access – Panel Lockout.
Set-Up - Accesses all the screens shown in Section 2-6 "First Menu Screen" on
page 2-22.
Purpose
2-7