Unit Top Screws; Turbo Board Connections - Agilent Technologies VS Series Operation Manual

VS Series Component Leak Detector
3. Use an M4 Allen wrench to remove the two screws on the unit's top and open the unit
(Figure B-14).
4. Disconnect the following cables (Figure B-24):
J5 cable from the P5 connector.
J3 cable from the P2 connector.
P2 cable from the connector.
Figure B-24 Turbo Board Connections
Figure B-23 Unit Top Screws
J5 cable
J3 cable
P2 cable
B-17