Spectrometer Cover Screws; Spectrometer Header Assembly Screws - Agilent Technologies VS Series Operation Manual

VS Series Component Leak Detector
6. Using an M3 Philips head screw driver, remove the four screws holding the
spectrometer cover and ground strap on (Figure B-78).
Figure B-78 Spectrometer Cover Screws
7. Using an M5 allen wrench, remove the six screws holding on the spectrometer header
assembly (Figure B-79).
Figure B-79 Spectrometer Header Assembly Screws
NOTE
Wear non-powdered, ESD-safe Nitride or equivalent gloves (not
included in kit) to prevent skin oils from getting on vacuum
surfaces. Ensure that personnel are properly grounded before
proceeding.
B-53