To access the Password change mechanism or to turn the feature ON or OFF, access
the Maintenance screen
2. Press the right arrow soft key button and the second Set-Up screen appears:
3. Press Maintenance on the second Set-Up screen to access the password change
mechanism and enable or disable the password feature (see Section 6.1 "Daily
Maintenance" on page 6-4).
The password can also be read off the RS-232 connector.
2-36
VS Series Component Leak Detector
When the Set-Up is pressed, a Password screen appears if the password function
is ON.
Figure 2-14 Password Protection Screen
If the password function is OFF, no Password request appears.
Figure 2-15 Set-Up Screen – Second