Unit Subsystem; Temperature <Name - Keithley 6517B Reference Manual

Section 14: SCPI command reference

:UNIT subsystem

The UNIT subsystem (see
measurement units for temperature readings.
:TEMPerature <name>
These commands select and query temperature units.
Usage
:UNIT:TEMPerature <name>
:TEMPerature?
<name>
Details
This command is used to select the units for temperature readings (internal and external). This
command controls the temperature reading units for the multiple displays, buffer readings and
readings sent out over the bus.
Also see
None
14-172
:UNIT command summary
 C or CEL: °C temperature units
 F or FAR: °F temperature units
 K: K temperature units
Model 6517B Electrometer Reference Manual
(on page 14-32)) is used to select
6517B-901-01 Rev. C / August 2015