Table of Contents
Advertisement
Section 14: SCPI command reference
Model 6517B Electrometer Reference Manual
Trigger event register:
Bit B0: Not used.
Bit B1, sequence 1 (Seq1): Set bit indicates that the instrument is in the trigger layer (PTR), or that
the instrument has exited from the trigger layer (NTR).
Bits B2 through B14: Not used.
Bit B15: Always zero.
Figure 119: Trigger event register
Arm event register:
Bit B0: Not used.
Bit B1, sequence 1 (Seq1): Set bit indicates that the instrument is in an arm layer (PTR), or that the
instrument has exited from the arm layers (NTR).
Bits B2 through B14: Not used.
Bit B15: Always zero.
Figure 120: Arm event register
14-104
6517B-901-01 Rev. C / August 2015
Advertisement
Table of Contents
