Keithley 6517B Reference Manual page 279

Section 14: SCPI command reference
Command
:ILINe
:ILINe?
:OLINe
:OLINe?
:SSYNchronous
:LINE <NRf>
:LINE?
Notes:
1. Defaults for continuous initiation:
:SYSTem:PRESet enables continuous initiation.
*RST disables continuous initiation.
2. TLINK and RTCLock (Arm Layer 1) are non-SCPI parameters for the :SOURce command. The
command (:SOURce), and all the other parameters are SCPI confirmed.
3. Defaults for count (Arm Layer 2 and trigger layer):
:SYSTem:PRESet sets the count to INF (infinite).
*RST sets the count to 1.
14-28
Description
<NRf> Select input line (1 to 6)
Query input line
<NRf> Select output line (1 to 6)
Query output line
Path to configure semi-synchronous
trigger link:
Select trigger line (1 to 6)
Query trigger line
Model 6517B Electrometer Reference Manual
Default parameter SCPI
2
1
1
6517B-901-01 Rev. C / August 2015