Keithley 6517B Reference Manual page 44

Model 6517B Electrometer Reference Manual
RESET
Use this menu option to reset the instrument to the bench or GPIB default conditions shown in the
table below. The RESET options are:

BENCH: The instrument returns to the bench default conditions. After selecting BENCH, the
instrument returns to the normal display of readings after requesting an ENTER to confirm your
selection.

GPIB: The instrument returns to the GPIB default conditions. After selecting GPIB, the instrument
returns to the normal display of readings after requesting an ENTER to confirm your selection.
Note that the instrument goes to the Idle state.
Factory default conditions
Function or operation
A/D Controls:
Line Synchronization
Data Stamp:
Temperature (external)
Humidity
Hardware Limit
Buffer:
Control
Count
time stamp
Elements
Display
Clock
Communications:
Interface (GPIB or RS-232)
GPIB:
Address
Language
Talk-Only (printer setup):
Interface
Interval
Formfeed
Page Size
Elements
RS-232:
Control (send/receive or talk-only)
Talk-Only (printer setup):
Interval
Formfeed
Page Size
Baud Rate
Terminator
Flow Control
Elements
6517B-901-01 Rev. C / August 2015
Bench default
(SYSTem:PRESet)
On
Off
Off
On
Fill and stop
No effect
No effect
No effect
Yes
No effect
No effect
No effect
No effect
IEEE-4888
1
Off
60 Lines
(see note)
No effect
1
Off
60 Lines
No effect
No effect
No effect
No effect
Section 2: Getting started
GPIB default (*RST)
On
Off
Off
On
Fill and stop
No effect
No effect
No effect
Yes
No effect
No effect
No effect
No effect
IEEE-4888
1
Off
60 Lines
(see note)
No effect
1
Off
60 Lines
No effect
No effect
No effect
No effect
2-21