Text Commands; Data <A - Keithley 6517B Reference Manual

Section 14: SCPI command reference

TEXT commands

:DATA <a>
This command is used to define the top and bottom display messages.
Usage
:DISPlay[:WINDow[1]]:TEXT:DATA <a>
:DISPlay:WINDow2:TEXT:DATA <a>
:DATA?
<a>
Details
Types: String 'aa...a' or "aa...a"
Indefinite Block #0aa...a
Definite Block #XYaa...a
Where: Y = number of characters in message:
Up to 20 for top display
Up to 32 for bottom display
X =number of digits that make up Y (1 or 2)
These commands define text messages for display. A message can be as long as 20 characters for
the top display, and up to 32 characters for the bottom display. A space is counted as a character.
Excess message characters results in an error.
An indefinite block message must be the only command in the program message or the last
command in the program message. If you include a command after an indefinite block message (on
the same line), it is treated as part of the message and is displayed instead of executed.
Also see
None
14-46
 ASCII characters for message
Model 6517B Electrometer Reference Manual
6517B-901-01 Rev. C / August 2015