[:Data] <N - Keithley 6517B Reference Manual

Model 6517B Electrometer Reference Manual
[:DATA] <n>
This command is used to specify LIMIT 1 and LIMIT 2 upper and lower limits.
Usage
:CALCulate3:LIMit[1]:UPPer[:DATA]
:CALCulate3:LIMit[1]:LOWer[:DATA]
:CALCulate3:LIMit2:UPPer[:DATA]
:CALCulate3:LIMit2:LOWer[:DATA]
:UPPer?
:UPPer? DEFault
:UPPer? MINimum
:UPPer? MAXimum
:LOWer?
:LOWer? DEFault
:LOWer? MINimum
:LOWer? MAXimum
<n>
Details
These commands are used to set the upper and lower limits for LIMIT 1 and LIMIT 2. The actual limit
depends on which measurement function is currently selected. For example, a limit value of 1  is 1
A for the amps function and 1 C for the coulombs function. A limit value is not range sensitive. A
limit of 2 for volts is 2 V on all measurement ranges.
Also see
None
6517B-901-01 Rev. C / August 2015
<n>
<n>
<n>
<n>
 -9.999999e35 to +9.999999e35:
 DEFault: Set specified upper limit to 1; set specified lower limit to -1
 MINimum: Set specified limit to -9.999999e35
 MAXimum: Set specified limit to +9.999999e35
Section 14: SCPI command reference
Specify limit value
14-39