Table of Contents
Advertisement
Model 6517B Electrometer Reference Manual
Command
:DELay
:DELay?
:SOURce
:SOURce?
:TIMer
:TIMer?
:SIGNal
:TCONfigure
:DIRection
<name>
:DIRection?
:ASYNchronous
:ILINe
<NRf>
:ILINe?
:OLINe
<NRf>
:OLINe?
:TRIGger[:SEQuence[1
]]
:IMMediate
:COUNt
<n>
:COUNt?
:DELay
<n>
:DELay?
:SOURce
:SOURce?
:TIMer
<n>
:TIMer?
:SIGNal
:TCONfigure
:PROTocol
<name>
:PROTocol?
:DIRection
<name>
:DIRection?
:ASYNchronous
6517B-901-01 Rev. C / August 2015
Description
<n>
Program delay (0 to 999999.999 sec)
Query delay
<name>
Select control source (HOLD,
IMMediate, TIMer, MANual, BUS,
TLINk, or EXTernal)
Query control source
<n>
Set timer interval (0 to 999999.999
sec)
Query timer
Loop around control source
Path to configure triggers:
Enable (SOURce) or disable
(ACCeptor) Bypass
Query direction
Path to configure asynchronous
trigger link:
Select input line (1 to 6)
Query input line
Select output line (1 to 6)
Query output line
Path to program trigger layer:
Loop around control source
Set measure count (1 to 99999, or INF) (Note 3)
Query measure count
Set delay (0 to 999999.999 sec)
Query delay
<name>
Select control source (HOLD,
IMMediate, TIMer, MANual, BUS,
TLINk, or EXTernal)
Query control source
Set timer interval (0 to 999999.999 sec) 0.1
Request the programmed timer interval
Loop around control source
Path to configure triggers:
Select protocol (ASYNchronous or
SSYNchronous)
Query protocol
Enable (SOURce) or disable
(ACCeptor) Bypass
Query direction
Path to configure asynchronous
trigger link:
Section 14: SCPI command reference
Default parameter
SCPI
0
IMMediate
(Note 2)
0.1
ACCeptor
2
1
0
IMMediate
(Note 2)
ASYN
ACCeptor
14-27
Advertisement
Table of Contents
