Common Command Descriptions; Cls (Clear Status) - Keithley 6517B Reference Manual

Model 6517B Electrometer Reference Manual

Common command descriptions

*CLS (clear status)

This command clears status registers and the error queue.
Details
The *CLS command is used to clear (reset to 0) the bits of the following registers in the Model 6517B:

Standard event status register

Operation event register

Error queue trigger event register

Sequence event register

Arm event status register

Measurement event register

Questionable event register
This command also forces the instrument into the operation complete command idle state and
operation complete query idle state.
Also see
None
6517B-901-01 Rev. C / August 2015
Section 12: Common commands
12-3