Table of Contents
Advertisement
Section 14: SCPI command reference
:TRIGger command summary
Command
:INITiate
[:IMMediate]
:CONTinuous
:CONTinuous?
:POFLag <name>
:POFLag?
:ABORt
:ARM[:SEQuence[1]]
[:LAYer[1]]
:IMMediate
:COUNt
<n>
:COUNt?
:SOURce
<name>
:SOURce?
:SIGNal
:TCONfigure
:DIRection
<name>
:DIRection?
:ASYNchronous
:ILINe
<NRf>
:ILINe?
:OLINe
<NRf>
:OLINe?
:RTCLock
:DATE <yr>,
<mo>, <day>
:DATE?
:TIME <hr>,
<min>, <sec>
:TIME?
:LAYer2
:IMMediate
:COUNt
<n>
:COUNt?
14-26
Description
Subsystem command path:
Initiate one trigger cycle
<b>
Enable or disable continuous initiation
Query continuous initiation
INCLude or EXCLude no pending flag
for initiate commands
Query pending operation flag
Reset trigger system
Path to configure arm layers:
Path to program Arm Layer 1:
Loop around control source
Specify arm count (1 to 99999, or INF) 1
Query arm count
Select control source (HOLD,
IMMediate, RTCLock, MANual, BUS,
TLINk, or EXTernal)
Query control source
Loop around control source
Path to configure triggers:
Enable (SOURce) or disable
(ACCeptor)
Query direction
Path to configure asynchronous
trigger link:
Select input line (1 to 6)
Query input line
Select output line (1 to 6)
Query output line
Path to configure the RTCLock
control source:
Specify the date for the clock event
Query the date for the clock event
Specify the time for the clock event
Query the time for the clock event
Path to program Arm Layer 2:
Loop around control source
Specify scan count (1 to 99999 or INF) (Note 3)
Query scan count
Model 6517B Electrometer Reference Manual
Default parameter
SCPI
(Note 1)
INCLude
(Note 2)
IMMediate
ACCeptor
2
1
6517B-901-01 Rev. C / August 2015
Advertisement
Table of Contents
