Table of Contents
Advertisement
Model 6517B Electrometer Reference Manual
:TRACe command summary
Command
:TRACe|:DATA
:CLEar
:FREE?
:POINts
:AUTO
:AUTO?
:ACTual?
:POINts?
:FEED
:PRETrigger
:AMOunt
[:PERCent] <n>
[:PERCent]?
:READings
:READings?
:SOURce <name>
:SOURce?
:CONTrol <name>
:CONTrol?
:DATA?
:LAST?
:TSTamp
:FORMat <name>
:FORMat?
:ELEMents <name>
*:SYSTem:PRESet and *RST have no effect on the commands in
this subsystem.
6517B-901-01 Rev. C / August 2015
Description
Use :TRACe or :DATA as root command
Clear readings from buffer
Query bytes available and bytes in use
<n>
Specify size of buffer
<b>
Enable or disable auto buffer sizing.
Query state of auto buffer sizing
Query number of readings stored in the
buffer
Query buffer size
Path to control Feed commands
Path to configure pre-trigger storage
Path to specify number of pre-trigger
readings
Specify % (0 to 100) of buffer
Query percentage
<n>
Specify as a number
Query number of readings
Select pre-trigger source event
(EXTernal,
Query pre-trigger source event
Select buffer control mode (NEVer,
NEXT,
ALWays, or PRETrigger)
Query buffer control mode
Read all readings in the buffer
Read last reading stored in buffer by
Alternating
Polarity test
Path to select time stamp format for
buffer
readings
Select time stamp format (ABSolute or
DELTa)
Query time stamp format
Select reading elements (TSTamp,
HUMidity,
CHANnel,
VSOurce, NONE)
TLINk, BUS, or MANual)
ETEMperature,
Section 14: SCPI command reference
Power-up
SCPI
defaults*
14-25
Advertisement
Table of Contents
