Enable <Nrf - Keithley 6517B Reference Manual

Electrometer
Hide thumbs Also See for 6517B:
Table of Contents

Advertisement

Section 14: SCPI command reference
:ENABle <NRf>
This command is used to program event registers.
Usage
:STATus:MEASurement:ENABle <NRf>
:STATus:QUEStionable:ENABle <NRf>
:STATus:OPERation:ENABle <NRf>
:STATus:OPERation:TRIGger:ENABle <NRf>
:STATus:OPERation:ARM:ENABle <NRf>
:STATus:OPERation:ARM:SEQuence:ENABle <NRf>
:ENABle?
<NRf>
Details
These commands are used to set the contents of the event enable registers, shown later in this
command description. An :ENABle command is sent with the decimal equivalent of the binary value
that determines the desired state (0 or 1) of each bit in the appropriate register.
Each event enable register is used as a mask for events. See
descriptions of events. When a bit in an event enable register is cleared (0), the corresponding bit in
the event register is masked and thus, cannot set the corresponding summary bit of the next register
set in the status structure. Conversely, when a bit in an event enable register is set (1), the
corresponding bit in the event register is unmasked. When the unmasked bit in the event register
sets, the summary bit of the next register set in the status structure is set.
The decimal weighting of the bits for each event enable register are included in the command
summaries noted above. The sum of the decimal weights of the bits that you wish to set is sent as the
parameter (<NRf>) for the appropriate :ENABle command. For example, to set the BFL and RAV bits
of the transition filter event enable register, send the following command:
:stat:meas:enab 544
Where:
BFL (Bit B9) = Decimal
RAV (Bit B5) = Decimal
<NRf> =
14-106
1: Set Bit B0
2: Set Bit B1
4: Set Bit B2
8: Set Bit B3
16: Set Bit B4
32: Set Bit B5
64: Set Bit B6
128: Set Bit B7
256: Set Bit B8
512: Set Bit B9
1024: Set Bit B10
2048: Set Bit B11
4096: Set Bit B12
8192: Set Bit B13
16384: Set Bit B14
32768: Set Bit B15
65535: Set all bits
512
32
544
Model 6517B Electrometer Reference Manual
[:EVENt]?
(on page 14-100) for
6517B-901-01 Rev. C / August 2015

Advertisement

Table of Contents
loading

Table of Contents