Table of Contents
Advertisement
Model 6517B Electrometer Reference Manual
Command
:AUTO?
:REFerence
:STATe
:STATe?
:ACQuire
:REFerence?
:DIGits
:AUTO <b>
:AUTO ONCE
:AUTO?
:DIGits?
:AVERage
:TYPE <name>
:TYPE?
:TCONtrol
<name>
:TCONtrol?
:COUNt
:COUNt?
:ADVanced
<n>
[:STATe]
[:STATe]?
:MEDian
[:STATe] <b>
[:STATe]?
:RANK <NRf>
:RANK?
:DAMPing <b>
:DAMPing?
:RESistance
:APERture
:AUTO
:AUTO
:AUTO?
6517B-901-01 Rev. C / August 2015
Description
:ULIMit
<n>
Set upper limit for auto range (0 to 21e-3)
:ULIMit?
Query upper limit
:LLIMit
<n>
Set lower limit for auto range (0 to 21e-3)
Query lower limit
:LLIMit?
Query auto range
<n>
Specify reference (-21e-3 to +21e-3)
<b>
Enable or disable reference
Query state of reference
Use input signal as reference
Query reference value
<n>
Specify measurement resolution (4 to 7)
Enable or disable auto resolution
Enable and then disable auto resolution
Query auto resolution
Query resolution
Path to control the average filter
Select filter type (NONE, SCALar,
ADVanced)
Query filter type
Select filter type: (MOVing or REPeat)
Query filter type
<n>
Specify filter count (1 to 100)
Query filter count
Path to configure and control advanced
filter
:NTOLerance
Specify noise tolerance level (0 to 100 %)
:NTOLerance?
Query noise tolerance level
<b>
Enable or disable digital filter
Query state of digital filter
Path to control the median filter:
Enable or disable median filter
Query state of median filter
Specify rank for median filter
Query rank
Enable or disable damping
Query state of damping
Path to configure resistance:
<n>
Set integration rate in seconds (166.67e-6
to 200e-3)
<b>
Enable or disable auto aperture
ONCE
Enable and then disable auto aperture
Query auto aperture
Section 14: SCPI command reference
Default parameter
SCPI
20e-3
2-e-12
0
OFF
6
SCALar
(Note 3)
10
1
OFF
ON
1
ON
(Note 1)
OFF
14-15
Advertisement
Table of Contents
