Hlevel <Nrf; Htime <Nrf - Keithley 6517B Reference Manual

Model 6517B Electrometer Reference Manual
:HLEVel <NRf>
This command specifies the high-level voltage for the square wave sweep test.
Usage
:TSEQuence:SQSWeep:HLEVel <NRf>
:HLEVel?
<NRf>
Details
This configuration command is used for the square wave sweep test.
:HLEVel? queries the high-level voltage.
Also see
None
:HTIMe <NRf>
This command specifies the high-level time for the square wave sweep test.
Usage
:TSEQuence:SQSWeep:HTIMe <NRf>
:HTIMe?
<NRf>
Details
This configuration command is used for the square wave sweep test.
:HTIMe? queries high-level time.
Also see
None
6517B-901-01 Rev. C / August 2015
-100.0 to 100.0 Volts; 100V range
-1000 to 1000 Volts; 1000V range
0 to 9999.9 (seconds)
Section 14: SCPI command reference
14-167