Type <Name - Keithley 6517B Reference Manual

Model 6517B Electrometer Reference Manual
:TYPE <name>
These commands select and query a test sequence.
Usage
:TSEQuence:TYPE <name>
:TYPE?
<name>
Details
This command is used to select the desired test sequence. When test sequence is started, the
selected test runs according to how it is configured. The commands in the following paragraphs
configure the test sequences.
:TYPE? queries the selected test sequence.
Also see
:TSOurce <name>
6517B-901-01 Rev. C / August 2015
 DLEakage: Diode leakage test
 CLEakage: Capacitor leakage test
 CIResistance: Cable insulation resistance test
 RVCoefficient: Resistor voltage coefficient test
 SRESistivity: Surface resistivity test
 VRESistivity: Volume resistivity test
 SIResistivity: Surface insulation resistance test
 SQSWeep: Square wave sweep test
 STSWeep: Staircase sweep test
 ALTPolarity: Alternating polarity resistance/resistivity test
(on page 14-158)
Section 14: SCPI command reference
14-157