Table 14-10 Trigger Command Summary - Keithley 6220 Reference Manual

Model 6220/6221 Reference Manual
Table 14-10
Trigger command summary
Command*
INITiate
[:IMMediate]
ABORt
ARM
[:SEQuence[1]]
[:LAYer[1]]
:SOURce <name>
:SOURce?
:SIGNal
:TIMer <n>
:TIMer?
[:TCONfigure]
:DIRection <name>
:DIRection?
[:ASYNchronous]
:ILINe <NRf>
:ILINe?
:OLINe <NRf>
:OLINe?
:OUTPut <name>
:OUTPut?
TRIGger
[:SEQuence[1]]
:SOURce <name>
:SOURce?
:SIGNal
[:TCONfigure]
:DIRection <name>
:DIRection?
[:ASYNchronous]
:ILINe <NRf>
* Arm layer commands control entire sweep. Trigger Layer commands control individual sweep steps.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Description
Trigger initiation:
Initiate one trigger cycle.
Reset trigger system.
Arm layer commands:
Select event detector: IMMediate, TIMer, BUS,
TLINk, BSTest, PSTest, NSTest, or MANual.
Query selected event detector.
Bypass ARM control source.
Set timer interval (seconds): 0 to 99999.99.
1msec resolution.
Query timer interval.
Control ARM source bypass: SOURce or
ACCeptor.
Query ARM source bypass.
Set ARM input signal line: 1 to 6.
Query ARM input signal line.
Set ARM output signal line: 1 to 6.
Query ARM output signal line.
Enable/disable ARM output trigger: TENTer,
TEXit or NONE.
Query ARM output trigger.
Trigger layer commands:
Select event detector: IMMediate or TLINk.
Query selected event detector.
Bypass TRIG control source.
Control TRIG source bypass: SOURce or
ACCeptor.
Query TRIG source bypass.
Set TRIG input signal line: 1 to 6.
Return to Section 14 topics
SCPI Reference Tables 14-17
Default Sec SCPI
8
OFF
8
8
0.1
ACC
1
2
NONE
8
IMM
ACC
1