Table 14-11 Trigger Command Summary - Keithley 2182 User Manual

Table 14-11
Trigger command summary
Command
:INITiate
[:IMMediate]
:CONTinuous <b>
:CONTinuous?
:ABORt
:TRIGger
[:SEQuence[1]]
:SOURce <name>
:SOURce?
:SIGNal
:COUNt <n>
:COUNt?
:DELay <n>
:AUTO <b>
:AUTO?
:DELay?
:TIMer <n>
:TIMer?
:SAMPle
:COUNt <n>
:COUNt?
Notes: 1. Defaults for continuous initiation:
SYSTem:PRESet enables continuous initiation.
*RST disables continuous initiation.
2. Defaults for Trigger Count:
SYSTem:PRESet sets count to INF (infinite).
*RST sets count to 1.
Description
Path to Initiate measurement cycle(s):
Initiate one cycle.
Enable or disable continuous initiation.
Query state of continuous initiation.
Reset trigger system (goes to idle state).
Path to configure Trigger Layer:
Select control source; IMMediate, TIMer, MANual,
BUS, or EXTernal.
Query control source.
Loop around control source.
Set measure count; 1 to 9999 or INF.
Query measure count.
Set trigger delay; 0 to 999999.999 (sec).
Enable or disable auto delay.
Query state of auto delay.
Query delay value.
Set timer interval for TIMer control source; 0 to
999999.999 (sec).
Query timer interval.
Sample Counter:
Specify sample count; 1 to 1024.
Query sample count.
SCPI Reference Tables
Default
Parameter Ref
Sec 7
(see Note 1)
IMMediate
(see Note 2)
0
ON
0.1
1
14-13
SCPI
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√