Figure I-1 Operator Panel Flowchart; Figure I-2 Run Comb Flowchart; Figure I-3 Run Acl Flowchart; Figure I-4 List Error Flowchart - Fujitsu M2488 Product Manual

M2488 PRODUCT GUIDE
The Operator Panel flowcharts, provided in this appendix, show the flow through the menus available via the
operator panel. Navigate the menus by pressing the pushbuttons indicated in the flowcharts. Begin with the
flowchart in Figure I-1.
The flowcharts are arranged as follows:
Figure I-1 Operator Panel Flowchart on page I-2
Figure I-2 RUN COMB Flowchart on page I-3
Figure I-3 RUN ACL Flowchart on page I-3
Figure I-4 LIST ERROR Flowchart on page I-4
Figure I-5 RS-232 Flowchart on page I-4
Figure I-6 SETTING Flowchart on page I-5
Figure I-7 LOAD CODE Flowchart on page I-6
Figure I-8 INQUIRY Flowchart on page I-6
Figure I-9 MODE PAGES Flowchart on page I-7
Figure I-10 FACTORY Flowchart on page I-8
Figure I-11 81:FSGRP Flowchart on page I-8
April 1997
APPENDIX I

FLOWCHARTS

CG00000-011503 REV. A
FLOWCHARTS
I-1