H-4.4 Combination : Running Test By Combining Up To Ten Commands - Fujitsu M2488 Product Manual

M2488 PRODUCT GUIDE
H-4.4 COMBINATION : Running test by combining up to ten commands
1) #:F-READ
(Forward read):
2) #:B-READ
(Backward
read):
3) #:WRITE
(Write):
4) #:D.S.E. (DSE): DSE operation
5) #:LOCATE
(Locate):
6) #:REWIND
(Rewind):
7) #:UNLOAD
(Unload):
8) #:LOAD (Load): Loading next tape from a magazine. (only ACL/FACL)
9) #:EJECT
(Eject):
10) TAPE PATH:
11) #:REPEAT
(Running
repeat):
The tests can be set using the following parameters
DIAG parameter 6: Specify a repeat start position.
execute count: Specify an execution count. Specify a command execution count from 1 to 99,999.
For example:
After end of 5th group, command code is set following:
DIAG command code is set "0x0A"
diag_parameter 6 is set "2"
execute count is set "3"
This diagnostic test repeats execution of diagnostic test
3 times from group 2 to group 5.
12) #:END
(Running end):
H-4.5 Error reset command
If A error is reported by the MTU during diagnostic test, it is necessary to issue this command.
April 1997
Forward read run
It is same "FWD READ" test of READ/WRITE test.
Backward read run
It is same "BWD READ" test of READ/WRITE test.
Write operation
It is same "WRITE" test of READ/WRITE test.
It is same "D.S.E."test of READ/WRITE test.
High-speed tape run to a specified sector
It is same "LOCATE" test of READ/WRITE test.
High-speed tape run to the wrap-1 BOT position
It is same "WRAP1 BOT" test of READ/WRITE test.
Unloading
Ejection (only ACL/FACL)
Tape run between the specified start position and end posi-
tion.
It is same "TAPE PATH" test of READ/WRITE test.
Repetition of run
This diagnostic test repeats execution of diagnostic test
from a specified test.
(When 0 is set, not repeat)
End of run
This is end of diagnostic test.
------- CMD CD : 0x70 or 0xF0
CG00000-011503 REV. A
MTU DIAGNOSTIC SPECIFICATIONS
:
------- CMD CD : 0x01
------- CMD CD : 0x02
------- CMD CD : 0x03
------- CMD CD : 0x04
------- CMD CD : 0x05
------- CMD CD : 0x06
------- CMD CD : 0x07
------- CMD CD : 0x08
------- CMD CD : 0x80
------- CMD CD : 0x0B
------- CMD CD : 0x0A
------- CMD CD : 0x0C
or 0xFF
H-9