Figure 2.18 External Operator Panel Connector - Fujitsu M2266S Technical Handbook

Pin 13
CN3/CN9
Pin 13
(CN9) (CN3
2.54 mm
2.54 mm
Pin Signal Signal Pin
01 +DIAG GNU 02
03 (Reserved) GND 04
05 —RAC GNU 06
07 —STM GNU 08
09 —104 GNU
10
Ii —11)2 GNU 12
13 —101 GNU 14
2.54 nun
,D
\-
Pa2 Pin
Pin I
Pin 14
2.54mm
CN7
2.54 mm
Pin Signal Signal Pin
01
LED (V)
WPR(G) 02
03 —WPR —LED 04
Note: Pins 04 to 10 are connected to the cable
connector for internal connection.
Only pins 01 to 04 are used for
connection of the operator panel.
2.54 aim
Pin 4
Pin 2
Pin 3
Pin 1
M2266S/H
Technical Handbook
Note: This figure shows the M22868s.
In M2266H, the setting terminal
(CNR4) exists between CN9 and CN3,
but pin assignments of CN9 and CN3
are the same as M2266Ss.
Figure 2.18 External Operator Panel Connector
Fujitsu America, Inc.
FS810125-01
A
2-15