Installation Instructions; Introduction; Preparing The M2488 And Its Optional Equipment; Configurations - Fujitsu M2488 Product Manual

M2488 PRODUCT GUIDE
1-1

INTRODUCTION

This chapter contains information on installing the M2488 tape drive and optional equipment. This
chapter is divided into the following major paragraphs:

1-2 PREPARING THE M2488 AND ITS OPTIONAL EQUIPMENT

1-3 CONFIGURATIONS

1-4 UNPACKING INSTRUCTIONS
1-5 EQUIPMENT INSPECTION
1-6 ASSEMBLY INSTRUCTIONS
1-7 PREPARATION FOR USE
1-2 PREPARING THE M2488 AND ITS OPTIONAL EQUIPMENT
Upon receipt of your equipment, follow the procedures in the order listed below:
STEP
1 Unpack the M2488.
Unpack the medium changer (if applicable).
2 Inspect the M2488.
Inspect the medium changer (if applicable).
3 Assemble the M2488 and medium changer (if applica-
ble).
4 Configure the M2488.
5 Operating the M2488.
1-3 CONFIGURATIONS
The M2488 tape drive may have a medium changer and be rack-mounted or placed on a desktop. Deter-
mine which configuration is to be used from the following tables, then refer to the indicated assembly
instructions after unpacking and inspecting the equipment.
April 1997
CHAPTER 1

INSTALLATION INSTRUCTIONS

NOTICE
SERVICE
PERSONNEL
ONLY
PROCEDURE
CG00000-011503 REV. A
INSTALLATION INSTRUCTIONS
WHERE?
Product Guide, Chapter 1, paragraph 1-4 or
User's Guide, Chapter 2
Product Guide, Chapter 1, paragraph 1-5 or
User's Guide, Chapter 2
Product Guide, Chapter 1, paragraph 1-6 or
User's Guide, Chapter 2
User's Guide, Chapter 4
User's Guide, Chapter 5
1-1