Unpacking Instructions; 1-4.1 Unpack The M2488 Tape Drive - Fujitsu M2488 Product Manual

INSTALLATION INSTRUCTIONS
1-4

UNPACKING INSTRUCTIONS

Use the following procedures to unpack the M2488 tape drive and its optional equipment. When the
equipment is unpacked, proceed to the inspection procedures in paragraph 1-5.
1-4.1 Unpack the M2488 Tape Drive
Unpack the M2488 tape drive as described below.
The model shown is a M2488 without an ACL or FACL attached.
1. Carefully remove the M2488 from the packing material as shown in the figure above.
2. Place the tape drive on a flat work surface.
3. Verify contents of package to the packing list.
4. Retain packing material for future use.
5. Continue with unpacking the medium changer (if applicable) or inspect the equipment.
1-4
M2488
** NOTE **
M2488 PRODUCT GUIDE
C144-E019-04EN