Additional Command Information On Medium Changer Mode Select And Mode Sense Commands; 6-3.1 Page Code 00H, Device Unique Parameters; Table 6-36. Page Code 00 - Device Unique Parameters - Fujitsu M2488 Product Manual

MEDIA CHANGER COMMANDS
6-3 ADDITIONAL COMMAND INFORMATION ON MEDIUM CHANGER
MODE SELECT AND MODE SENSE COMMANDS
Table 6-35 lists the page codes supported by the Medium Changer MODE SELECT and MODE
SENSE commands.
PAGE CODE
The current value of non-changeable Mode Parameters must be
returned in MODE SELECT command data.
6-3.1 Page Code 00h, Device Unique Parameters

Table 6-36. Page Code 00 - Device Unique Parameters

BYTES 7 6
0 PS * Reserved
1
2
Reserved
3
4 - 7
8 - 15
* The PS bit must be set to 0 on a MODE SELECT command.
Bits are changeable
6-32
Table 6-35. Page Codes
DESCRIPTION
00h Device Unique Parameters
1Dh Element Address Assignments
1Eh Transport Geometry Parameters
1Fh Device Capabilities
** NOTE **
BITS
5 4 3
Page Code
Additional Page Length
HltLd Eject Code
Position
Cartridge Map
Reserved
CG00000-011503 REV. A
M2488 PRODUCT GUIDE
2 1 0
Mode Code
Changeable only if ACL attached.
MODE SENSE
DEFAULT
VALUES
ACL FACL
80h
0Eh
09h 01h
00h
00000000h
00h
March 1997