Fujitsu M2488 Product Manual page 475

M2488 PRODUCT GUIDE
Table F-22. Routine 81 - Manufacturing Test Diagnostic Error Codes (Continued)
ROUTINE TEST
0x81 0x06 Rewind
0x81 0x07 Locate Block
0x08 Space Block
0x81
0x81 0x09 Write Filemarks
0x81 0x0A Space File
0x81 0x0B Display MFG Results
April 1997
ERROR
TITLE
CODE
0x01
0x02
0x03
0x04
0x01
0x01
0x01
0x02
0x03
0x04
0x05
0x06
0x01
-
CG00000-011503 REV. A
DIAGNOSTIC TESTS AND ERROR CODES
DESCRIPTION
Cartridge not installed or drive NOT READY
error. A tape cartridge must be loaded before
this test can be run.
Timeout waiting for Servo Command Com-
plete during rewind operation.
Timeout waiting for Formatter Action Com-
plete during rewind operation.
Record Manager or Servo error reported dur-
ing rewind operation.
Error while attempting to locate block.
Error while attempting to space block.
Cartridge not installed or drive NOT READY
error. A tape cartridge must be loaded before
this test can be run.
Cartridge WRITE PROTECT error. The car-
tridge must not be write protected for this test.
Buffer space request not granted for data
transfer.
Logical EOT encountered before all filemarks
had been written.
Timeout during write filemarks.
Error reported at completion of write
filemarks.
Error while attempting to space file.
(No error codes specific to this test)
F-75