Fujitsu M2488 Product Manual page 300

MEDIA CHANGER COMMANDS
An XX → YY bit value of one indicates that the Medium Changer supports MOVE MEDIUM com-
mands where the source element is type XX and the destination element is type YY. The following
sources and destinations are supported:
ST → DT
Select cartridge from magazine and load cartridge into tape unit.
ST → IE
Unload magazine.
ST → ST
Move cartridge in magazine to empty slot in magazine.
IE → ST
Load magazine.
DT → IE
Unload cartridge from tape unit and place it into magazine, then unload.
DT → ST
Unload cartridge from tape unit and place it into magazine.
6-40 CG00000-011503 REV. A
M2488 PRODUCT GUIDE
March 1997