Fujitsu M2488 Product Manual page 390

CHK XX ERROR CODES
Table E-1. CHK xx Error Code Descriptions (Continued)
CHK XX
CODE
6D RRC CAN NOT BE DETERMINED
6E FILE PROTECT SENSOR FAILURE DURING POWER UP
70 BACKWARD COMMAND AT BOT
FORWARD COMMAND AT PEOT
71
72 TIME OUT ERROR IN DECELERATION
73 NOT READY BY OPERATOR
74 TIME OUT ERROR IN FIRST MACHINE REEL WRAP
75 TIME OUT ERROR IN ACCELERATION
76 OVER SPEED IN ACCELERATION
77 REVERSE ROTATION IN CONSTANT SPEED SERVO
78 IN STOP LOCK SERVO FILE REEL TURNS TOO MUCH
79 IN STOP LOCK SERVO MACHINE REEL TURNS TOO MUCH
7A RRC CHANGED BY TOO MANY COUNTS
7B TOO MANY MACHINE REEL INTERRUPTS
7C FILE REEL DIRECTION ERROR DURING UNLOADING
7D FILE REEL TURNS TOO FAST DURING UNLOADING
7E MACHINE REEL DIRECTION ERROR DURING UNLOADING
7F MACHINE REEL TURNS TOO FAST DURING UNLOADING
82 MOUNT ARM MOVE FORWARD TIMEOUT ERROR DURING POWER UP
83 MOUNT ARM MOVE BACKWARD TIMEOUT ERROR DURING POWER UP
8E MOUNT ARM MOVE FORWARD RETRY EXHAUSTED
8F MOUNT ARM MOVE BACKWARD RETRY EXHAUSTED
90 MOUNT ARM HOME/DRIVE END & MAGAZINE END SENSORS ALL ON
92 MOUNT ARM HOME/DRIVE END SENSORS BOTH ON
93 MOUNT ARM HOME/MAGAZINE END SENSORS BOTH ON
94 MOUNT ARM HOME SENSOR ALWAYS ON
95 MOUNT ARM DRIVE END SENSOR ALWAYS ON
96 MOUNT ARM MAGAZINE END SENSOR ALWAYS ON
97 MOUNT ARM DRIVE & MAGAZINE END SENSORS BOT ON
99 DOOR SOLENOID LOCK TIMEOUT ERROR
9A DOOR SOLENOID UNLOCK TIMEOUT ERROR
E-4
DESCRIPTION
CG00000-011503 REV. A
M2488 PRODUCT GUIDE
April 1997