4-3.20.2 Diagnostic; Table 4-86. Diagnostic Page Codes; Table 4-87. Receive Diagnostic Results Page, General Form; Table 4-88. Page 00H - Supported Diagnostic Pages (Factory Mode) - Fujitsu M2488 Product Manual

M2488 PRODUCT GUIDE
4-3.20.2 Diagnostic Page Codes (PF=1 in SEND DIAGNOSTIC command CDB)
If the Page Format (PF) bit was set to 1 in a previous SEND DIAGNOSTIC command, the
RECEIVE DIAGNOSTIC RESULTS (FACTORY MODE) command will return diagnostic result
data in paged format with 00h, 80h, 81h, and 90h through 9Fh as the returned Page Code. Refer to
Table 4-86 and Table 4-87.
QUALIFIER
00h
80h
81h
90-9Fh

Table 4-87. Receive Diagnostic Results Page, General Form

BYTES 7
0
1
2-3
4-N
Description of the Page Code 00h
The Page Code 00h instructs the target to make available the list of all supported diagnostic pages
to be returned by a subsequent RECEIVE DIAGNOSTIC RESULTS (FACTORY MODE) com-
mand.

Table 4-88. Page 00h - Supported Diagnostic Pages (FACTORY MODE)

BYTES 7
0
1
2-3
4
5
6
7
April 1997

Table 4-86. Diagnostic Page Codes

DESCRIPTION
Supported diagnostics pages (see Table 4-79)
Online diagnostic test page (see Table 4-80)
Manufacturing Online diagnostic test page (FACTORY MODE
only, see Table 4-91)
MTU Online diagnostic test pages (FACTORY MODE only, see
Table 4-93)
BITS
6 5 4
Page Code (XXh)
Reserved
Page Length (n-3)
Diagnostic Parameters
BITS
6 5 4
Page Code (00h)
Reserved
Page Length (0013h)
Supported page list (00h)
Supported page list (80h)
Supported page list (81h)
Supported page list (90h)
CG00000-011503 REV. A
TAPE UNIT SCSI COMMANDS
3 2 1
3 2 1
0
0
4-91